EN
CEMENT-BONDED
PARTICLE BOARDS

CBPB FACING

FACING WITH CBPB

SURFACE TREATMENT OF CEMENT-BONDED PARTICLE BOARDS ATTENTION! REGARDLESS OF THE WAYS OF CBPB SURFACE TREATMENT, IT IS STRONGLY RECOMMENDED TO APPLY A FIRST COAT TO SURFACES AND EDGES.

FAÇADE PAINTING OF CBPB . SYSTEM WITH SEEN DILATATION JOINTS

Priming coat, 1 layer Finishing payment, 2 layers Producer
Disbon 481 Caparol Thermo San NQG. Façade paint on the base of silicon resin Caparol
Tiefgrund TB Amphibolin - Caparol. Acrylic paint Caparol
CapaSol LF Caparol Acryl - Fassadenfarbe. Acrylic paint Caparol
Caparol Sylitol 111 Konzentra - silicate priming coat on the base of liquid glass Silitol-Fin. Mineral paint Caparol
Malech / Elastocolor Primer Elastocolor. Elastic paint on the acrylic paint base MAPEI
--18 (Shagren). Water-dispersive acrylic paint , SAMARA
--18 (Shagren). Water-dispersive acrylic paint , SAMARA
--035 --117. Water-dispersive acrylic paint in two layers PIGMENT, Tambov
Priming coat strengthened Bolars Structure. Textured Bolars on the base of acrylic dispersion Bolars, Moscow
Primer Fasade Alpha Coat. Textured paint, blind waterborne quartziferous Sikkens

FAÇADE PAINTING OF CBPB . SYSTEM WITH CLOSED DILATATION JOINTS

Priming coat Finish painting, 2 layers Producer
Prime coat Malech / Elastocolor Primer Elastocolor elastic paint on the acrylic base MAPEI.

PLASTERING


FAÇADE PLASTERING CBPB . SYSTEM WITH SEEN EXPANSION JOINTS OR JOINTS CLOSED WITH DECORATIVE LATHS

Structure scheme of an open expansion joint for compensation of linear changes, caused by thermo-moisture influence.

Base Priming coat, 1 layer Finish plastering Producer
Extra" glue + cement 5000 Fibreglass mesh alkaliproof Facture plastering "Fine" . , SAMARA
Capillary Fresque decorative relief paste with fibre facture Max decor
Optimist G 103. G "Optimist", "Tyaga" Finish plaster, elastic plaster, polymeric mineral plaster G Stena, Izhevsk
Optimistic G103 Manna D - 708 G "Optimist". TYAGA, Moscow
Akrylit-06 PG Acrylit 415, elastic plaster NPO Oliva
Primeseal Stuc-O-Flex Representative office in Russia Publishing house "Beautiful houses press
PrimerFasade ANEROC 80 TRIMETAL Acrylic decorative plaster with bark texture Finishing with paint AlphaTopCoat (2 layers) Sikkens

FAÇADE PLASTERING CBPB . SYSTEM WITH CLOSED EXPANSION JOINTS

The scheme of closed expansion joint

Preparation Base layer Finish plaster Producer
Priming coat Malech.Spackling with the help of Mapetherm AR2 and net MapethermNet (a lath of the net having width 33 cm is put on the expansion joint) Mapetherm AR2 on the whole territory by armouring with the net MapethermNet in the middle layer SilancolorTonachino- decorative plaster on the silicone base MAPEI.
Capillary Fresque - decorative relief paste with fibre facture Max decor
Spackling with the help of KerabondT + latex Isolastic and net MapethermNet (a lath having width 33 is put on the expansion joint) Priming coat Malech spreading Mapetherm AR2 on the whole territory by armouring with the net MapethermNet in the middle layer SilancolorTonachino- decorative plaster on the silicone base MAPEI.
For closing of the expansion joint at the junction of CBPB having thickness 12mm one can put a cord made of expanded polyethylene (Vilaterm) into the seam Ø 8, then elastic spackling "JointCompound" Priming coat "Stuc-O-Base" Stuc-O-FlexStuc-O-Flex Representative in RF Publishing house Beautiful houses Moscow
Repairing the seams with acrylic sealer Accent 117 Extra Flex" elastic glue + CEMENT 5000. Glassnet alkaliproof, buried into glue Sahara Flex- elastic plaster Z P , Samara
Glued armouring mass KlebeundSpachteImasse 190 grau+ armouring net 650. Priming coat Caparol-Putzgrund with quartz filling Capatect-Fassadenputz R 30 Caparol
Priming coat Optimist G 103, Producer G "Optimist" Finish plaster, elastic plaster, polymer-mineral plaster G Stena, Izhevsk
Priming coat Optimist G 103, Producer G "Optimist" Finish polymer-mineral plaster "Rain" G Stena, Izhevsk

NOTICE

When making finish works it is necessary to follow the instructions for applying material systems of this very producer.

The least demanding concerning the quality of the finished surface are texture paints that is why namely they are recommended for self-facade painting with a roller. Not textured (glossy) paints are recommended to be applied only for specially prepared surfaces with sunk and spackled screws.

RECOMMENDATIONS ON USING THE SCREWS

For fixing CBPB to the frames on the facades, it is recommended to apply galvanized or anodized self-tapping crews (hereinafter - screws), as black (phosphated) can corrode under the atmospheric moisture exposure, and together with this they lose their strength qualities, and rust can appear through finish surface.

PREPARATION OF CBPB SURFACE FOR HOLDING FAÇADE FINISH WORKS

Before painting it is necessary to prepare CBPB surface as follows:

  • To deepen all screws for 1-2 mm;
  • To spackle all holes and detrusions with façade spackles, for example, produced by the company "Spackle under painting" + cement 5000;
  • After drying of the spackle to rub down all the unevennesses with flint-paper;
  • To clean a plate surface from dust with a wet duster;
  • To level CBPB surface absorption to deposit with a roller or a brush a priming coat o f a deep penetration on all sides of the plate including borders;
  • Plate borders are easier treated with a priming coat not each sheet separately, but at the moment when the plates are in the pack;
  • Then to apply finish materials in accordance with the instruction given by a producer. otdelka-pict4.jpg
SEE ALSO
←  

Rambler's Top100 Rambler's Top100